Patented product, Cleaning and dedusting
High Pressure Suspension Grinding Mill adopts many proprietary technologies. Pressurizing device with high pressure spring can improve the grinding pressure of roller, which makes efficiency improved by 10%-20%. And the sealing performance and dust removal effect is pretty good.
Applications:
Cement, coal, power plant desulfurization, metallurgy, chemical industry, non-metallic mineral, construction material, ceramics.
Overview
High Pressure Suspension mill is mainly made up of
the mainframe, separator, blower, finished powder
cyclone collector, bag filter and connecting pipes,
etc.
According to users’ need, the mill can also be
equipped with accessory equipments like crusher, bucket
elevators, hopper, electromagnetic vibrating feeder
and switch box, etc. Inside the mainframe, the roller
subassembly is suspended on the roller suspender through
horizontal supporting axis, and the roller suspender
fixed up with the main shaft and shovel stand. Located
outside of the roller bearing house, the pressure springs
make rollers push down the inside surface of ring through
horizontal supporting axis. Shovels installed on the shovel
stand and rollers rotate together when the motor drives main
shaft through transmission device and the rollers roll
appressed the inside surface of ring and rotate at the
same time. The separator impellers are driven by motor
through transmission device to rotate, more higher the
speed of separator impellor, more fine the powders been
separated.
Learn More About Liming® High Pressure Suspension Grinding Mill
1. Compared with other mills, its capacity increases
by 10%-20% under the same power condition, and compression
force of rollers to material improve 800-1200kgf under the
force of high-pressure spring.
2. Size of final product can be 0.613mm (30mesh)
–0.033mm (425mesh). Some can reach the fineness of 0.013mm
(1000 mesh).
3. High Pressure Suspension Mill meets the requirement
of national dust-dump standard.
4. The separator can be adjusted very easily.
5. The multi-class seals are adopted to keep the
grinding equipment tightly closed.
Working Principle
When entering grinding chamber, the raw materials are shoveled up by the shovels and grinded between the rollers and ring; the materials after grinding are brought into the separator along with the air from the blower, and the qualified fine powder became final products and come into the cyclone powder collector, the other unqualified powder fall down to be re-grinded. The circular air returns back to the blower that the above process will be repeated, and the remaining air enters the bag filter in order to protect the environment.
Specifications - Technical Data
| Model | Piece of roller | Size of the roller (mm) | Size of the ring (mm) | Feed size (mm) | Fineness of powder (mm) | Capacity (t/h) | Motor power (kW) | Weight (without motor) (t) |
|---|---|---|---|---|---|---|---|---|
| YGM65 | 3 | Φ210×150 | Φ650×150 | ≤15 | 0.033-0.613 | 0.4-1.8 | 15 | 3.6 |
| YGM75 | 3 | Φ260×150 | Φ780×150 | ≤15 | 0.033-0.613 | 1-3 | 18.5 | 4.8 |
| YGM85 | 3 | Φ270×150 | Φ830×150 | ≤20 | 0.033-0.613 | 1.2-4 | 22 | 8 |
| YGM95 | 4 | Φ310×170 | Φ950×170 | ≤25 | 0.033-0.613 | 2.1-5.6 | 37 | 14 |
| YGM130 | 5 | Φ410×210 | Φ1280×210 | ≤30 | 0.033-0.613 | 2.5-9.5 | 75 | 24 |